| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime Online Service |
| Warranty: | One-Year Warranty |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Machine Model | ACT-3000 |
| Lifting Capacity | Mass 3000kg Vehicles |
| Working Voltage | 220V/1Phase, or 380V/1Phase, 50/60hz |
| The Highest Height | 1050mm |
| Test Mode | Automatic or Manual |
| Shake Duration | Customized |
| Equipment Composition | Main Vibration Table*2+Support Frame*2 +Stress Relief*2 |
| Working Temperature | -20ºC~50ºC |
| Gross Weight | 738kg(4 pieces/single max 240kg) |
The equipment has large lifting weight, stable and safe work, solid materials and low noise.It can effectively and quickly detect the abnormal sound and vibration of vehicles on kinds of bumpy roads.Quickly help stores to improve the output value of chassis business, good visual effect.
· It allows car repair technicians to accurately and quickly identify noises and murmurs in the vehicle, eliminating the need for road testing.
· It helps save time, enhance customer confidence, improve vehicle's safety and comfort. Improves store reputation and provides new sources of income. · This inspection device allows you to quickly identify abnormal noise problems in the vehicle without leaving the repair shop, making the diagnosis process and results more convenient, fast and transparent.
Firstly lifting the vehicle to a suitable height by lifter, and push the four devices to the corresponding positions of the four wheels. Then slowly lower the height of the vehicle until the four tires fall into the tire support. At this time, controlling the equipment to suitable position by the height adjuster, and tighten the locking nuts. The lifter continues to lower until it stops 5cm away from the chassis of the vehicle. Finally you can start the test.Firstly confirm if the device is plugged into a three-hole socket, the power supply is AC220V or 380V, and it is well grounded. The power line requires at least 2.5 square meters, then rotate the emergency stop button to turn on the power and enter the system. There are two programs in the interface: manual/automatic. Select the automatic mode and click the system to start. The device will automatically switch from 1 Flat mode (10Hz). 2 Bumpy mode (20Hz). 3 Pothole mode (30Hz). You can choose any 1, 2, or 3 modes when selecting the manual mode. Generally, the 2 Bumpy mode (20HZ) is sufficient to simulate a very bumpy road surface when testing the chassis of the car. It is not recommended to directly select the 3 Pothole mode (30Hz).
){kind=link}